Safety Devices understand what you want and what the governing bodies require from a Motor sport roll cage.

All cages are designed with safety, functionality and aesthetics in mind - we know you need your cage to be safe and fit for purpose but that it’s also important to you that it looks good.

Details of this Safety Devices product are as follows:

6 Point bolt in roll cage. For vehicles without interior trim. Please note Front cage penetrates dashboard and will therefore need to be trimmed accodingly

Available with single or cross door bars. Please select required options from the drop down on the right

For Evo Models 7-9 Please select from the options on the right.

These bolt in cages offer a high level of roll over protection for race, rally, and trackday participants. They are also straightforward to fit and offer a precision fit. Complies to MSA regulations at date of publication

Basic installation guide:
1. Loosely assemble the cage inside your car (with the basic interior and seats removed)
2. Once you are happy that it is correctly aligned, tack weld the pre-fabricated mounting feet in place.
3. Remove the cage and seam weld all the way round the mounting feet.
4. reinstall the cage and bolt down securely.

Notes:
If in doubt regarding the spec of cage you need please check with your sanctioning body

International Orders: If you are ordering this cage from outside the UK, you may get an incorrect shipping charge at checkout. If this is the case, our case team will contact you with the additional amount required to ship this, or any alternative methods.

To obtain certification for your cage, please call Motor Sport UK on +44 (0) 1752 765000 with the sticker number (tamperproof sticker is on the cage). Please ask for ALL AMMENDMENT pages to be included.

Stock images used. Actual product may vary.