FP: RED Turbocharger for Subaru STi/WRX - Oil supply line and gasket set included!

Compressor wheel - HTZ 79
Flow rating - 65LB per minute
CW Measurements - 57.3MM Inducer / 79MM Exducer
TW Measurements - 67.3MM Inducer / 58.8MM Exducer
Compressor Housing - 84MM FAP Cover
Turbine Housing - FP 8CM or 10CM Subaru Turbine Housing
CHRA - FP Journal Bearing
Oil Line - Included
Redesigned in 2018, the Subaru FP Red has our HTZ 79 compressor wheel in our 84MM Flow Advancement Port™ compressor cover to give you the same power as the old Red with massively improved spool and response time.

In the past we have sold two different types of oil lines. They were known as Type 1 or Type 2, and it was too easy to get confused as to the type needed due to various model differences across the years. To solve this problem, we developed a new oil feed line that includes the parts for both Type 1 and Type 2 cars. The installation instructions below will show which parts to use based on which type of car you have, which is why we are still using the Type 1 and 2 designators.

All Forced Performance turbochargers are built to order to your exact specifications and should not be considered on the shelf ready to ship unless specifically noted on the work order. Build times vary by model of turbo and options of said turbocharger, therefore we cannot guarantee a delivery date or ETA.

For Subaru Models STi / WRX Only.

Stock images used. Actual product may vary.