FP: 71HTA Turbocharger for Subaru STi/WRX - Oil supply line and gasket set included!

Compressor wheel - FP 71HTA™
Flow rating - 51LB per minute
CW Measurements - 51.2MM Inducer / 68MM Exducer
TW Measurements - 60.8MM Inducer / 54MM Exducer
Compressor Housing - 58 MM Stock Appearing Cover
Turbine Housing - FP 8CM Subaru Turbine Housing
CHRA - FP Journal Bearing
Oil Line - Included
The FP 71HTA™ turbocharger for the Subaru WRX/STI features the 71HTA™ compressor section with a 58MM stock appearing compressor cover coupled to the 8cm2 turbine section. This combo produces the fastest spool and transient response possible of any of our Subaru based turbochargers. The FP 71HTA™ flows 51LB a minute which is capable of producing upwards of 425WHP.

Porting is available for this turbocharger. Please take a look at our Porting Services page for examples.

84MM Cover Requires TGV Delete to fit in stock location

In the past we have sold two different types of oil lines. They were known as Type 1 or Type 2, and it was too easy to get confused as to the type needed due to various model differences across the years. To solve this problem, we developed a new oil feed line that includes the parts for both Type 1 and Type 2 cars. The installation instructions below will show which parts to use based on which type of car you have, which is why we are still using the Type 1 and 2 designators.

Attention: All Forced Performance turbochargers are built to order to your exact specifications and should not be considered on the shelf ready to ship unless specifically noted on the work order. Build times vary by model of turbo and options of said turbocharger, therefore we cannot guarantee a delivery date or ETA

For Subaru Models STi / WRX Only.

Stock images used. Actual product may vary.