Evo 1-3 68HTA

Compressor wheel - 68HTA
Flow rating - 51LB per minute
CW Measurements - 51.2MM Inducer / 68MM Exducer
TW Measurements - 60.8MM Inducer / 54MM Exducer
Compressor Housing - 16G TD05H (56mm)
Turbine Housing - FP 8CM
CHRA - FP Journal Bearing
Oil Line - Not Included
The FP 68HTA™ Turbocharger for DSM flanged vehicles out flows both the E3 16G and 18G wheels and allows for higher PR operation without increased compressor outlet temperatures like the existing 16G and 18G wheels. Mass flow is increased to a whopping 51lb/min which is several lb/min greater than either the E3 16G or the 18G wheels are capable. To maximize it's power potential this turbo comes standard with a 8CM turbine housing.

Attention: All Forced Performance turbochargers are built to order to your exact specifications and should not be considered on the shelf ready to ship unless specifically noted on the work order. Build times vary by model of turbo and options of said turbocharger, therefore we cannot guarantee a delivery date or ETA.

For Evo Model 1-3 Only.

Stock images used. Actual product may vary.